Install Guide

Figure 77. Organizationally Specific TLV
IEEE Organizationally Specific TLVs
Eight TLV types have been defined by the IEEE 802.1 and 802.3 working groups as a basic part of LLDP; the IEEE OUI is
00-80-C2. You can configure the Dell EMC Networking system to advertise any or all of these TLVs.
Table 57. Optional TLV Types
Type TLV Description
Optional TLVs
4 Port description A user-defined alphanumeric string that
describes the port. Dell EMC Networking
OS does not currently support this TLV.
5 System name A user-defined alphanumeric string that
identifies the system.
6 System description A user-defined alphanumeric string that
identifies the system.
7 System capabilities Identifies the chassis as one or more
of the following: repeater, bridge,
WLAN Access Point, Router, Telephone,
DOCSIS cable device, end station only,
or other.
8 Management address Indicates the network address of
the management interface. Dell EMC
Networking OS does not currently
support this TLV.
IEEE 802.1 Organizationally Specific
TLVs
127 Port-VLAN ID On Dell EMC Networking systems,
indicates the untagged VLAN to which
a port belongs.
127 Port and Protocol VLAN ID On Dell EMC Networking systems,
indicates the tagged VLAN to which a
port belongs (and the untagged VLAN
to which a port belongs if the port is in
Hybrid mode).
127 Protocol Identity Indicates the protocols that the port can
process. Dell EMC Networking OS does
not currently support this TLV.
IEEE 802.3 Organizationally Specific
TLVs
127 MAC/PHY Configuration/Status Indicates the capability and current
setting of the duplex status and bit
rate, and whether the current settings
are the result of auto-negotiation.
This TLV is not available in the Dell
EMC Networking OS implementation of
LLDP, but is available and mandatory
494 Link Layer Discovery Protocol (LLDP)