Deployment Guide

Example of the show alias Command
DellEMC# configure terminal
DellEMC(config)# alias-definition
DellEMC(conf-alias-definition)# alias ns no shutdown
DellEMC(conf-alias-definition)# alias 10gint interface TenGigabitEthernet $1
Viewing alias configuration
To view the Alias configurations, use the following commands:
1. Display the complete list of aliases and its definitions.
EXEC Privilege mode
DellEMC#show alias
DellEMC# show alias
-----------------------------------------------------------------
Alias Name Definition
-----------------------------------------------------------------
showipbr10 show ip interface brief | ….
showipbr40 show ip interface brief | ….
shboot show bootvar…
cr-vlan interface vlan $1 ..
-----------------------------------------------------------------
Total Alias Configured : 4
-----------------------------------------------------------------
NOTE:
The alias definition displays upto 40 characters and you can view the detailed list of definitions using the
details option.
2. Display the details of all the aliases that are configured on the system.
EXEC Privilege mode
DellEMC#show alias details
DellEMC# show alias details
------------------------------------------------------------------
Name: showipbr10
Definition:
show ip interface brief | grep tengig ignore-case
------------------------------------------------------------------
------------------------------------------------------------------
Name: showipbr40
Definition:
show ip interface brief | grep fortygig ignore-case
------------------------------------------------------------------
DellEMC#
3. Display the details of a specific alias.
EXEC Privilege mode
DellEMC#show alias details showipbr10
DellEMC# show alias details showipbr10
------------------------------------------------------------------
Name: showipbr10
Definition:
show ip interface brief | grep tengig ignore-case
------------------------------------------------------------------
DellEMC#
42
Configuration Fundamentals