Administrator Guide

● For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then
the slot/port information.
● For the Management interface on the stack-unit, enter the keyword
ManagementEthernet then the slot/port information.
● For a port channel interface, enter the keywords port-channel then a
number.
● For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.
ip ip-address
mask
(OPTIONAL) Enter the keyword ip then an IP address in the dotted decimal
format. Enter the optional IP address mask in the slash prefix format (/ x).
inspection Enter the keyword inspection with one of the following keywords to view ARP
entries:
● database — view a list of ARP entries learned using DAI
● statistics — view DAI statistics
macaddress mac-
address mask
(OPTIONAL) Enter the keyword macaddress then a MAC address in
nn:nn:nn:nn:nn:nn format. Enter the optional MAC address mask in nn:nn:nn:nn:nn
format also.
static (OPTIONAL) Enter the keyword static to view entries entered manually.
retries (OPTIONAL) Enter the keyword retries to show the number of ARP retries
before a 20–second back off.
dynamic (OPTIONAL) Enter the keyword dynamic to view dynamic entries.
summary (OPTIONAL) Enter the keyword summary to view a summary of ARP entries.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Added support for VRF and added usage information for the clear arp-cache
command.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.5.1.0 Added support for 4-port 40G line cards on the E-Series.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Added support for 4094 VLANs on the E-Series (the prior limit was 2094).
8.1.1.0 Introduced on the E-Series.
7.9.1.0 Introduced VRF on the E-Series.
7.8.1.0 Augmented to display local ARP entries learned from private VLANs (PVLANs).
762 IPv4 Routing