Administrator Guide

show diag
Display the diagnostic information.
Syntax
show diag {information | stack-unit number [detail [interval] | summary] |
testcase stack-unit number [interactive | level0 | level1 | level2]}
Parameters
information Enter the keyword information to display diagnostic information.
stack-unit
number
Enter the keywords stack-unit then the stack-unit number to display diagnostic
details of the specific stack unit.
detail Enter the keyword detail to display diagnostic information in detail.
summary Enter the keyword summary to display a summary of diagnostic information.
testcase Enter the keyword testcase to display the list of diagnostic test cases. To display
the diagnostic test cases of the particular level, use the keywords interactive,
level0, level1, level2 after the keyword testcase.
Defaults None
Command Modes EXEC Privilege
Example
DellEMC#show diag information
Diag information:
Diag software image version:
9.8(1.0)
-------------------------------------------------------------------
stack-unit Member 1: No Unit diags executed yet (stack-unit not
Offline).
-------------------------------------------------------------------
DellEMC#show diag testcase stack-unit 1
**************************** Z9100 Diagnostics Test
*************************
Test ID Test Description Test Level
------- ---------------- ----------
1 SMARTFUSIONFPGAACCESSTEST Level0
2 CPLDACCESSTEST Level0
3 CPUTYPEDETECTTEST Level0
4 CPUSDRAMPRESENCETEST Level0
5 CPUSDRAMSIZETEST Level0
6 CPLDBOARDTYPETEST Level0
7 I2CACCESSTEST Level0
8 PSUPRESENCETEST Level0
9 PSUSOURCETYPETEST Level0
10 PSUSTATUSMONITORTEST Level0
11 PSUFANSPEEDMONITORTEST Level0
12 PSUFANSTATUSMONITORTEST Level0
13 PSUFANAIRFLOWTYPETEST Level0
14 FANTRAYPRESENCETEST Level0
15 FANSTATUSMONITORTEST Level0
16 FANAIRFLOWTYPETEST Level0
17 RTCPRESENCETEST Level0
18 SSDPRESENCETEST Level0
[output truncated]
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
EMC Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command.
Version Description
9.10(0.0) Introduced on the S6100.
Debugging and Diagnostics 503