Administrator Guide

Field Description
Destination
QID/Rx Process
Destination Service Identifier
Cur Len Current number of messages enqueued
High Mark Highest number of packets in the queue at any time
#of to / Timeout Timeout count
#of Retr /Retries Number of retransmissions
#msg Sent/Msg
Sent/
Number of messages sent
#msg Ackd/Ack
Rcvd
Number of messages acknowledged
Retr /Available
Retra
Number of retries left
Total/ Max Retra Number of retries allowed
Important Points:
● The SWP provides flow control-based reliable communication between the sending and receiving
software tasks.
● A sending task enqueues messages into the SWP queue3 for a receiving task and waits for an
acknowledgement.
● If no response is received within a defined period of time, the SWP timeout mechanism resubmits the
message at the head of the FIFO queue.
● After retrying a defined number of times, the SWP-2-NOMORETIMEOUT timeout message is
generated.
● In the S-Series example, a retry (Retries) value of zero indicates that the SWP mechanism reached
the maximum number of retransmissions without an acknowledgement.
Example
DellEMC#show processes ipc flow-control cp
Q Statistics on CP Processor
TxProcess RxProcess Cur High Time Retr Msg Ack Aval Max
Len Mark Out ies Sent Rcvd Retra Retra
ACL0 RTM0 0 0 0 0 0 0 10 10
ACL0 DIFFSERV0 0 0 0 0 0 0 10 10
ACL0 SNMP0 0 0 0 0 0 0 10 10
LACP0 IFMGR0 0 0 0 0 0 0 25 25
DHCP0 ACL0 0 0 0 0 0 0 25 25
DHCP0 IPMGR0 0 0 0 0 0 0 25 25
DHCP0 IFMGR0 0 0 0 0 0 0 25 25
show processes memory
Display memory usage information based on processes running in the S-Series or Z-Series system.
Syntax
show processes memory {management-unit | stack unit {unit-id | all |
summary}}
Parameters
management-unit Enter the keyword management-unit for CPU memory usage of the stack
management unit.
stack unit unit id Enter the keyword stack unit then a stack unit ID of the member unit for which
to display memory usage on the forwarding processor.
all Enter the keyword all for detailed memory usage on all stack members.
summary Enter the keyword summary for a brief summary of memory availability and usage
on all stack members.
Command Modes
● EXEC
138 Control and Monitoring