Release Notes
Table Of Contents
- Dell EMC System S6010–ON 9.14(2.9P1) Release Notes
- Document Revision History
- Supported Hardware
- Supported Software
- New Dell Networking OS Version 9.14(2.9) Features
- Restrictions
- Changes to Default Behavior and CLI Syntax
- Documentation Corrections
- Deferred Issues
- Fixed Issues
- Known Issues
- Upgrading the ONIE Package for the S6010-ON System
- Upgrading the DIAG Package for the S6010-ON System
- Installing Dell EMC Networking OS on the S6010-ON using ONIE
- Upgrade the S6010-ON Dell EMC Networking OS Image and Boot Code using Dell EMC Networking OS CLI
- Upgrading the CPLD
- Uninstalling Dell EMC Networking OS from the S6010-ON
- Support Resources
stack-unit 5 is not present.
stack-unit 6 is not present.
DellEMC#
4. Upgrade the S6010-ON Boot Flash and Boot Selector images.
EXEC Privilege Mode
upgrade boot [all | bootflash-image | bootselector-image] stack-unit [1-6 | all] [booted
| flash: | ftp: | scp: | tftp: | usbflash:]
The Boot Flash and Boot Selector images can be upgraded together by selecting all in the command. If you want to upgrade
Boot Flash image or Boot Selector image separately, use the bootflash-image or the bootselector-image options
separately. Use the booted option to upgrade the Boot flash and Boot Selector images to the image versions packed with
the loaded Dell EMC Networking OS image. You can find the Boot Flash and Boot Selector image versions packed with the
loaded Dell EMC Networking OS using the show os-version command in the EXEC PRIVILEGE mode. Dell #upgrade
boot all stack-unit 1 booted
DellEMC#show os-version
RELEASE IMAGE INFORMATION :
---------------------------------------------------------------------
Platform Version Size ReleaseTime
S-Series:S6010 9.14(2.9) 72268454 Dec 15 2020 08:40:03
TARGET IMAGE INFORMATION :
---------------------------------------------------------------------
Type Version Target checksum
runtime 9.14(2.9) Control Processor passed
BOOT IMAGE INFORMATION :
---------------------------------------------------------------------
Type Version Target checksum
boot flash 3.26.2.10 Control Processor passed
BOOTSEL IMAGE INFORMATION :
---------------------------------------------------------------------
Type Version Target checksum
boot selector 3.26.0.0-4
Control Processor passed
FPGA IMAGE INFORMATION :
---------------------------------------------------------------------
Card FPGA Name Version
stack-unit 1 S6010-ON SYSTEM CPLD 12
stack-unit 1 S6010-ON MASTER CPLD 12
stack-unit 1 S6010-ON SLAVE CPLD 5
DellEMC#
DellEMC#upgrade boot bootflash-image stack-unit 1 tftp:
Address or name of remote host []: 10.16.127.35
Destination file name []: FTOS-S6010-9.14.2.9.bin
00:09:22 : Discarded 1 pkts. Expected block num : 51. Received block num: 50
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.
Current Boot information in the system:
========================================================================
Card BootFlash Current Version New Version
------------------------------------------------------------------------
Unit1 Boot Flash 3.26.2.7 3.26.2.10
***********************************************************************
* Warning - Upgrading boot flash is inherently risky and should only *
* be attempted when necessary. A failure at this upgrade may cause *
* a board RMA. Proceed with caution ! *
***********************************************************************
Proceed upgrade Boot Flash image for stack-unit 1 [yes/no]: yes
!!!!!!
Bootflash image upgrade for stack-unit 1 completed successfully.
DellEMC#
16