Administrator Guide

no-redistribution (OPTIONAL) Specify that the redistribute command does not distribute
routes into the NSSA. This command can be used when the router is an
autonomous system boundary router (ASBR) or area border router (ABR).
default-
information-
originate
(OPTIONAL) Allows external routing information to be imported into the NSSA by
using Type 7 default.
no-summary (OPTIONAL) Specify that no summary LSAs should be sent into the NSSA.
Defaults Not configured.
Command Modes ROUTER OSPF
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.13(0.0) Introduced on the remaining DNOS platforms.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for the Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre- 6.1.1.1 Introduced on the E-Series.
clear ipv6 ospf process
Reset an OSPFv3 router process without removing or re-configuring the process.
Syntax
clear ipv6 ospf [vrf vrf-name] process
Parameters
vrf vrf-name (Optional) Enter the keyword vrf followed by the name of the VRF to clear IPv6
routes corresponding to that VRF.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Open Shortest Path First (OSPFv2 and OSPFv3) 1105