Release Notes
Table Of Contents
- Dell EMC S5048F–ON System Release Notes, OS Version 9.14(2.9P1)
- Document Revision History
- Requirements
- New Dell EMC Networking OS Version 9.14(2.9) Features
- Restrictions
- Changes to Default Behavior and CLI Syntax
- Documentation Corrections
- Deferred Issues
- Fixed Issues
- Known Issues
- Upgrading the ONIE Package for the S5048F-ON System
- Upgrading the DIAG Package for the S5048F-ON System
- Installing Dell EMC Networking OS on the S5048F-ON using ONIE
- Upgrading the CPLD
- Upgrading the SmartFusion Microcontroller Subsystem — SMF MSS-IAP
- Upgrading the SmartFusion Microcontroller Subsystem — SMF MSS-FPGA
- Upgrading the OOB-FPGA
- Upgrading the S5048F-ON Dell EMC Networking OS Image using Dell EMC Networking OS CLI
- Upgrade the Boot Selector and Boot Flash Images from Dell EMC Networking OS
- Uninstalling the Dell EMC Networking OS
- Installing a Third Party Operating System
- Support Resources
Manufacturer 0x2B 5 CES00
Country Code 0x2C 2 CN
Vendor Name 0x2D 8 Dell EMC
Service Tag 0x2F 7 8VSRG02
Vendor Extension 0xFD 4 0x00 0x00 0x02 0xA2
Part Number 0x22 6 0797T2
Serial Number 0x23 20 CN0797T2CES0078G0003
Device Version 0x26 1 1
Label Revision 0x27 3 A00
Base MAC Address 0x24 6 34:17:EB:37:0E:00
Product Name 0x21 9 S5048F-ON
Platform Name 0x28 30 x86_64-dellemc_s5048f_c2538-r0
ONIE Version 0x29 10 3.38.1.1-3
Diag Version 0x2E 10 3.38.3.1-2
CRC-32 0xFE 4 0x6BAC6783
Checksum is valid.
Updating Grub Cfg /dev/sda3 EDA-DIAG
ONIE uefi_uuid B60D-2BA8
INSTALLER DONE...
Removing /tmp/tmp.cdUSCg
ONIE: NOS install successful: diag-installer-x86_64-dellemc_s5048f_c2538-
r0-3.38.3.1-2-2020-12-15.bin
ONIE: Rebooting...
ONIE:/ # discover: installer mode detected.
Stopping: discover...start-stop-daemon: warning: killing process 2638: No such process
done.
Stopping: dropbear ssh daemon... done.
Stopping: telnetd... done.
Stopping: syslogd... done.
Info: Unmounting kernel filesystems
umount: can't umount /: Invalid argument
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL tosd 4:0:0:0: [sda] Synchronizing SCSI cache
reboot: Restarting system
reboot: machine restart
Installing Dell EMC Networking OS on the S5048F-ON
using ONIE
NOTE:
You will need the Dell EMC Networking OS installer package, ONIE-FTOS-S5048F-ON-9.14.2.9.bin to install
the Dell EMC Networking OS on your S5048F-ON system that has only ONIE.
To install the Dell EMC Networking OS version 9.14(2.9) on a new S5048F-ON device, perform the following steps:
1. Reboot the system. During the reboot process, the system displays the following message prompting you to press the Esc
key in order to stop the auto-boot process:
Press Esc to stop autoboot ... 5
Grub 2.02~beta2 (Dell EMC)
Built by root at gbbdev-maa-01 on Tue_Dec_15_08:55:22_UTC_2020
S5048F Boot Flash Label 3.38.2.6 NetBoot Label 3.38.2.6
2. At this prompt message, press the Esc key. The following menu appears:
GNU Grub 2.02~beta2 (Dell EMC)
Built by root at gbbdev-maa-01 on Tue_Dec_15_08:55:22_UTC_2020
+----------------------------------------------------------------------------+
|*DELL EMC Networking OS |
| DELL EMC Networking OS-Boot Line Interface |
| EDA-DIAG |
| ONIE |
| |
14