Release Notes

System image upgrade completed successfully.
DellEMC#Dec 15 06:12:19: %STKUNIT1-M:CP %DOWNLOAD-6-UPGRADE: Upgrade completed
successfully
3. Verify that the Dell EMC Networking OS has been upgraded correctly in the upgraded flash partition
EXEC Privilege Mode
show boot system stack-unit [1-6] | all]
DellEMC#show boot system stack-unit all
Current system image information in the system:
==================================================================
Type Boot Type A B
------------------------------------------------------------------
stack-unit 1 FLASH BOOT 9.14(2.9)[boot] 9.14(2.8)
stack-unit 2 is not present.
stack-unit 3 is not present.
stack-unit 4 is not present.
stack-unit 5 is not present.
stack-unit 6 is not present.
DellEMC#
4. Change the Primary Boot Parameter of the S4048T-ON to the upgraded partition A: or B:
CONFIGURATION Mode
boot system stack-unit 1 primary system: [A: | B: | tftp: | ftp:]
5. Save the configuration so that the configuration will be retained after a reload using write memory command.
EXEC Privilege Mode
write memory
DellEMC#
DellEMC#write memory
!
Dec 15 06:15:48: %STKUNIT1-M:CP %FILEMGR-5-FILESAVED: Copied running-config to
startup-config in flash by default
DellEMC#
6. Reload the unit.
EXEC Privilege Mode
reload
DellEMC#reload
7. Verify the S4048T-ON has been upgraded to the Dell EMC Networking OS version 9.14(2.9).
EXEC Privilege Mode
show version
DellEMC#show version
Dell EMC Real Time Operating System Software
Dell EMC Operating System Version: 2.0
Dell EMC Application Software Version: 9.14(2.9)
Copyright (c) 1999-2020 by Dell Inc. All Rights Reserved.
Build Time: Tue Dec 15 21:22:46 2020
Build Path: /build/build02/SW/SRC
Dell EMC Networking OS uptime is 1 hour(s), 34 minute(s)
System image file is "system://A"
System Type: S4048T-ON
Control Processor: Intel Rangeley with 3 Gbytes (3181805568 bytes) of memory, core(s)
2.
20