Release Notes
Table Of Contents
- Dell EMC System S4048T–ON 9.14(2.9P1) Release Notes
- Document Revision History
- Supported Hardware
- Supported Software
- New Dell EMC Networking OS Version 9.14(2.9) Features
- Restrictions
- Changes to Default Behavior and CLI Syntax
- Documentation Corrections
- Deferred Issues
- Fixed Issues
- Known Issues
- Upgrading the sub-components
- Upgrading the ONIE Package for the S4048T-ON System
- Upgrading the DIAG Package for the S4048T-ON System
- Installing Dell EMC Networking OS on the S4048T-ON using ONIE
- Support Resources
Following is the installation and boot log of Dell EMC Networking OS:
ONIE:/ # onie-nos-install tftp://10.16.127.143/ONIE-FTOS-SK-9.14.2.9.bin
discover: Rescue mode detected. No discover stopped.
GRUB loading.
Welcome to GRUB!
Built by root at ubuntu on Tue_Dec_15_07:05:39_UTC_2020
WARNING: skipping large memory map entry: 0x100000000/0x40000000/0x1
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
8. After the installation completes, the system displays the following DELL prompt:
DellEMC>
Upgrading the S4048T-ON Dell EMC Networking OS Image using the
Dell EMC Networking OS CLI
NOTE: If you are upgrading from Dell EMC Networking OS version 9.9(0.0P18) or earlier, you cannot directly upgrade to
version 9.14(2.9) or above. Upgrade to version 9.10(0.0) or above first and then upgrade to the required version.
Bare Metal Provisioning
NOTE:
If you are using Bare Metal Provisioning (BMP), see the Bare Metal Provisioning topic in the Dell EMC Networking
OS Configuration Guide or the Open Automation Guide.
Manual Upgrade Procedure
Follow these steps carefully to upgrade your S4048T-ON systems:
1. Dell EMC Networking recommends that you back up your startup configuration and any important files and directories to an
external media prior to upgrading the system.
2. Upgrade the Dell EMC Networking OS in flash partition A: or B:
EXEC Privilege Mode
upgrade system [flash: | ftp: stack-unit <1-6> | tftp: | scp: | usbflash:] [A: | B:]
DellEMC#upgrade system ftp: a:
Address or name of remote host []: 10.16.127.86
Source file name []: /tftpboot/ONIE-FTOS-SK-9.14.2.9.bin
User name to login remote host: veswar
Password to login remote host:
!!!!!!!!!Dec 15 06:10:47: %S4048T-ON:1 %KERN-6-INT: CP Mgmt port receiving excessive
traffic; will be rate controlled
!!!!!!!!!!!Dec 15 06:10:58: %S4048T-ON:1 %KERN-6-INT: CP Mgmt port receiving
excessive traffic; will be rate controlled
- repeated 3 times
!!!!!!!!!!!!!!!!!!!!!!!Dec 15 06:11:22: %S4048T-ON:1 %KERN-6-INT: CP Mgmt port
receiving excessive traffic; will be rate controlled
- repeated 5 times
!!!!!!!!..............................................................................
......................................................................................
......................................................................................
......................................................................................
......................................................................................
......................................................................................
......................................................................................
......................................................................................
......................................................................................
......................................................................................
.......!
66927711 bytes successfully copied
19