White Papers

Field Description
Application
Priority TLV:
Remote ISCSI
Priority Map
Status of iSCSI advertisements in application priority TLVs from the remote peer
port: enabled or disabled.
PFC TLV
Statistics: Input
TLV pkts
Number of PFC TLVs received.
PFC TLV
Statistics:
Output TLV pkts
Number of PFC TLVs transmitted.
PFC TLV
Statistics: Error
pkts
Number of PFC error packets received.
PFC TLV
Statistics: Pause
Tx pkts
Number of PFC pause frames transmitted.
PFC TLV
Statistics: Pause
Rx pkts
Number of PFC pause frames received.
Example
(Summary)
show interface pfc statistics
Displays counters for the PFC frames received and transmitted (by dot1p priority class) on an interface.
Syntax
show interface port-type pfc statistics
Parameters
port-type Enter the port type and the interface information.
NOTE: This command also enables you to view information corresponding to a range of ports.
However, for Open Networking (ON) platforms the notation for specifying port range in the
command is different from how you specify in non-ON platforms.
● For non-ON platforms, you can specify multiple ports as slot/port-range. For example, if you
want to display information corresponding to all ports between 1 and 4, specify the port range as
show interfaces interface-type 1/1 - 4.
● For ON platforms, you can specify multiple ports as slot/port/[subport] - slot/port/
[subport]. For example, if you want to display information corresponding to all ports between 1
and 4, specify the port range as show interfaces interface-type 1/1/1 - 1/1/4.
Command Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Enabled to display the command output even without enabling DCB.
9.9(0.0) Added support to display the interface configurations corresponding to a range of
ports.
9.8(1.0) Introduced on the Z9100–ON.
478 Data Center Bridging (DCB)