Release Notes

2d4h38m : Discarded 1 pkts. Expected block num : 51. Received block num: 50
2d4h38m : Discarded 1 pkts. Expected block num : 65. Received block num: 64
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!...
........................................................
...........
66927711 bytes successfully copied
System image upgrade completed successfully.
DellEMC#Dec 15 08:47:44: %STKUNIT1-M:CP %DOWNLOAD-6-UPGRADE: Upgrade completed
successfully
DellEMC#
3. Verify that the Dell EMC Networking OS has been upgraded correctly in the upgraded flash partition
EXEC Privilege Mode
show boot system stack-unit [1-6] | all]
Dell#show boot sys stack-unit all
Current system image information in the system:
===================================================================
Type Boot Type A B
-------------------------------------------------------------------
stack-unit 1 FLASH BOOT 9.14(2.9)[boot] 9.14(2.8)
stack-unit 2 is not present.
stack-unit 3 is not present.
stack-unit 4 is not present.
stack-unit 5 is not present.
stack-unit 6 is not present.
Dell#
4. Change the Primary Boot Parameter of the S4048-ON to the upgraded partition A: or B:
CONFIGURATION Mode
boot system stack-unit 1 primary system: [A: | B: | tftp: | ftp:]
5. Save the configuration so that the configuration will be retained after a reload using write memory command.
EXEC Privilege Mode
write memory
DellEMC#write memory
!
Dec 15 04:44:35: %STKUNIT1-M:CP %FILEMGR-5-FILESAVED: Copied running-config to
startup-config in flash by default
DellEMC#
6. Reload the unit.
EXEC Privilege Mode
reload
Command : reload
Mode : EXEC PRIVILEGE
DellEMC#reload
Proceed with reload [confirm yes/no]: y
Dec 15 10:20:04: %STKUNIT1-M:CP %CHMGR-5-RELOAD: User request to reload the chassis
syncing disks... done
7. Verify the S4048 ON has been upgraded to the Dell EMC Networking OS version 9.14(2.9).
EXEC Privilege Mode
14