Release Notes
Table Of Contents
- Dell EMC System S4048–ON 9.14(2.9P1) Release Notes
- Document Revision History
- Supported Hardware
- Supported Software
- New Dell EMC Networking OS Version 9.14(2.9) Features
- Restrictions
- Changes to Default Behavior and CLI Syntax
- Documentation Corrections
- Deferred Issues
- Fixed Issues
- Known Issues
- Upgrading the sub-components
- Upgrading ONIE on the S4048-ON
- Upgrading the S4048-ON Dell EMC Networking OS Image using the Dell EMC Networking OS CLI
- Installing Dell EMC Networking OS on the S4048-ON using ONIE
- Uninstalling Dell EMC Networking OS from the S4048-ON
- Support Resources
-- Stack unit 1 --
S4048-ON SYSTEM CPLD : 15.2
S4048-ON MASTER CPLD : 12
S4048-ON SLAVE CPLD : 5
DellEMC#
Use the following command to view CPLD version that is associated with the Dell EMC Networking OS image:
DellEMC#show os-version
RELEASE IMAGE INFORMATION :
---------------------------------------------------------------------
Platform Version Size ReleaseTime
S-Series:SK-ON 9.14(2.9) 66927971 Dec 15 2020 00:43:07
TARGET IMAGE INFORMATION :
---------------------------------------------------------------------
Type Version Target checksum
runtime 9.14(2.9) Control Processor passed
BOOT IMAGE INFORMATION :
---------------------------------------------------------------------
Type Version Target checksum
boot flash 3.21.2.9 Control Processor passed
BOOTSEL IMAGE INFORMATION :
---------------------------------------------------------------------
Type Version Target checksum
boot selector 3.21.0.0-6
Control Processor passed
FPGA IMAGE INFORMATION :
---------------------------------------------------------------------
Card FPGA Name Version
stack-unit 1 S4048-ON SYSTEM CPLD 15.2
stack-unit 1 S4048-ON MASTER CPLD 12
stack-unit 1 S4048-ON SLAVE CPLD 5
DellEMC#
Upgrading the CPLD Image
NOTE:
The upgrade fpga-image stack-unit 1 booted command is hidden when using the FPGA Upgrade
feature in the CLI. However, it is a supported command and will be accepted when entered as documented.
NOTE: Ensure that the BIOS version is 3.21.0.0-6 . You can verify this version using show system stack-unit 1
command.
To upgrade the CPLD image on S4048-ON, follow these steps:
1. Upgrade the CPLD image.
EXEC Privilege Mode
upgrade fpga-image stack-unit <id> booted
DellEMC#
DellEMC#upgrade fpga-image stack-unit 1 booted
Current information for the system:
========================================================================
Card Device Name Current Version New Version
------------------------------------------------------------------------
Unit1 S4048-ON SYSTEM CPLD 11 15.2
Unit1 S4048-ON MASTER CPLD 9 12
Unit1 S4048-ON SLAVE CPLD 4 5
***********************************************************************
10