Users Guide

-- Unit 1 --
Unit Type : Management Unit
Status : online
Next Boot : online
Required Type : S4048-ON - 54-port TE/FG (SK-ON)
Current Type : S4048-ON - 54-port TE/FG (SK-ON)
Master priority : 0
Hardware Rev : 2.0
Num Ports : 72
Up Time : 2 day, 20 hr, 49 min
Dell EMC Networking OS Version : 9.13(0.0)
Jumbo Capable : yes
POE Capable : no
FIPS Mode : disabled
Boot Flash : 3.21.2.9
Boot Selector : 3.21.0.10-2
Memory Size : 3201302528 bytes
Temperature : 38C
Voltage : ok
Serial Number : NA
Part Number : 004JJR Rev A01
Vendor Id : DL
Date Code : 22122015
Country Code : CN
Piece Part ID : CN-004JJR-28298-5CM-0011
PPID Revision : A01
Service Tag : C1SYX42
Expr Svc Code : 262 305 126 74
Auto Reboot : enabled
Burned In MAC : f4:8e:38:06:87:16
No Of MACs : 3
-- Power Supplies --
Unit Bay Status Type FanStatus FanSpeed Power AvgPower AvgPowerStartTime
-------------------------------------------------------------------------------------
0 1 down UNKNOWN down 0 0 0 N/A
1 2 up UNKNOWN up 7016 85 94 12/15/2017-08:17
-- Fan Status --
Unit Bay TrayStatus Fan1 Speed Fan2 Speed
------------------------------------------------------------------------------------
1 1 up up 7072 up 7021
1 2 up up 7021 up 6971
1 3 up up 7021 up 7021
Speed in RPM
show tech-support
Display a collection of data from other show commands, necessary for Dell EMC Networking technical support to perform
troubleshooting.
Syntax
show tech-support [stack-unit unit-id | page]
Parameters
stack-unit (OPTIONAL) Enter the keywords stack-unit to view CPU memory usage for the
stack member designated by unit-id.
page (OPTIONAL) Enter the keyword page to view 24 lines of text at a time. Press the
SPACE BAR to view the next 24 lines. Press the ENTER key to view the next line
of text.
When using the pipe command ( | ), enter one of these keywords to filter command
output. For details about filtering commands, refer to CLI Basics.
save Enter the keyword save to save the command output.
152 Control and Monitoring