Release Notes
Table Of Contents
- Dell EMC Z9100–ON System Release Notes, OS Version 9.14(2.10)
- Document Revision History
- Requirements
- New Dell Networking OS Version 9.14(2.10) Features
- Restrictions
- Documentation Corrections
- Changes to the Default Behavior and CLI Syntax
- Deferred Issues
- Fixed Issues
- Known Issues
- Upgrading the sub-components
- Upgrading the ONIE Package for the Z9100-ON System
- Upgrading the DIAG Package for the Z9100-ON System
- Installing Dell EMC Networking OS on the Z9100-ON using ONIE
- Upgrading the Z9100-ON Dell EMC Networking OS Image using Dell EMC Networking OS CLI
- Uninstalling the Dell EMC Networking operating system
- Installing a Third Party Operating System
- Support Resources
May 18 16:23:12: %STKUNIT1-M:CP %CHMGR-5-PS_DOWN_CLR: Power supply 2 down reported in
unit 1 is cleared
May 18 16:23:12: %STKUNIT1-M:CP %CHMGR-5-FANTRAY_REMOVED: Major Alarm :Fan tray 1 of
Unit 1 is removed
May 18 16:23:12: %STKUNIT1-M:CP %CHMGR-5-FANTRAY_REMOVED: Major Alarm :Fan tray 2 of
Unit 1 is removed
May 18 16:23:12: %STKUNIT1-M:CP %CHMGR-5-FANTRAY_REMOVED: Major Alarm :Fan tray 3 of
Unit 1 is removed
May 18 16:23:12: %STKUNIT1-M:CP %CHMGR-5-FANTRAY_REMOVED: Major Alarm :Fan tray 4 of
Unit 1 is removed
May 18 16:23:13: %STKUNIT1-M:CP %CHMGR-5-FANTRAY_REMOVED: Major Alarm :Fan tray 5 of
Unit 1 is removed
May 18 16:23:13: %Z9100-ON:1 %CHMGR-2-FAN_SPEED_CHANGE: Fan speed changed to 100 % of
the full speed
May 18 16:23:13: %STKUNIT1-M:CP %CHMGR-0-ALL_FANTRAY_DOWN: Major Alarm :All Fan trays
down or removed in Unit 1
BIOS (Dell EMC, Inc.) Boot Selector
Z9100 3.23.0.0-9 32 port 100G / 2 port sfp+ mgmt
Booting Primary BIOS
SMF Version 0x12: Last POR=0x11, Reset=0x44
After the SMF MSS-IAP upgrade is successfully completed, the system re-boots automatically.
2. After the system re-boots, wait for the Dell EMC prompt. Verify the MSS-IAP version using the show revision command
output.
EXEC Privilege Mode
show revision
DellEMC#show revision
-- Stack unit 1 --
Z9100-ON CPLD 1 : 7
Z9100-ON CPLD 2 : 4
Z9100-ON CPLD 3 : 4
Z9100-ON CPLD 4 : 4
Z9100-ON MSS FPGA : 2.2
Z9100-ON MSS IAP : 2.5
Z9100-ON OOB-FPGA : 1.0
DellEMC#
NOTE: Do not power off the system while the FPGA upgrade is in progress. For any queries, contact Technical Support.
Upgrade the SmartFusion Microcontroller Subsystem — SMF MSS-
FPGA
NOTE:
Before upgrading the SmartFusion Microcontroller Subsystem SMF MSS-FPGA, you must first upgrade the SMF
MSS-IAP.
To upgrade the SmartFusion Microcontroller Subsystem — SMF MSS-FPGA, follow these steps:
1. Upgrade the SMF MSS-FPGA image.
EXEC Privilege Mode
14