CLI Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

991

992

993

994

995

996

997

998

999

1000

Version Description

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9000

switches.

ipv6 nd ra–guard policy

Define the RA guard policy name and enter the RA guard policy list configuration mode.

Syntax

ipv6 nd ra-guard policy policy-name

Parameters

policy

policy-

name

Enter the keyword policy then the policy-name. The policy name allows a

maximum of 140 characters.

Defaults None

Command Modes CONFIGURATION

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.11(0.0) Introduced on the C9010.

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100-ON.

9.9(0.0) Introduced on the Z9500.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9000

switches.

Commands

● ipv6 nd ra-guard enable — configure the RA guard related commands.

ipv6 neighbor

Configure a static entry in the IPv6 neighbor discovery.

S6000

Syntax

ipv6 neighbor [vrf vrf-name] {ipv6-address} {interface interface}

{hardware_address}

To remove a static IPv6 entry from the IPv6 neighbor discovery, use the no ipv6 neighbor [vrf

vrf-name] {ipv6-address} {interface interface} command.

Parameters

vrf

vrf-name

(Optional) Enter the keyword vrf followed by the name of the VRF to install IPv6

routes in that VRF.

ipv6-address

Enter the IPv6 address of the neighbor in the x:x:x:x::x format.

Neighbor Discovery Protocol (NDP) 999