CLI Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

991

992

993

994

995

996

997

998

999

1000

Parameters

policy

policy-

name

Enter the keyword policy then the policy name. The policy-name allows a

maximum of 140 characters.

vlan

[vlan 1, vlan

2, vlan 3........]

Enter the keyword vlan then the VLAN range. The VLAN range is from 1 to 4094.

Defaults None

Command Modes INTERFACE

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.11(0.0) Introduced on the C9010.

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100-ON.

9.9(0.0) Introduced on the Z9500.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9000

switches.

Commands

● show ipv6 nd ra-guard policy — display the configuration applied on all the RA guard policies or a

specific RA guard policy.

ipv6 nd ra–guard enable

Allow you to configure the RA guard related commands.

Syntax

ipv6 nd ra-guard enable

To disable the RA guard, use the no ipv6 nd ra-guard enable command.

Defaults Disabled

Command Modes CONFIGURATION