CLI Guide

• show login statistics
• show memory
• show processes cpu
• show processes ipc flow-control
• show processes memory
• show reload-type
• show reset-reason
• show software ifm
• show system
• show tech-support
• ssh-peer-stack-unit
• telnet
• telnet-peer-stack-unit
• terminal length
• traceroute
• undebug all
• virtual-ip
• warmboot-failure-action
• write
alias
Configure shorter alias names for single-line command input.
Syntax
alias alias-name command
To undo the configuration, use the no alias alias-name command command.
Parameters
alias alias-name Enter the keyword alias then the alias-name.
NOTE: The alias-name length is limited to 32 characters starting with
alphanumeric and are not case-sensitive. Special characters are not allowed
except hyphen— -. You cannot use the reserved keywords such as
configure, show, reload, reboot, exit, end, quit, do,
no, enable, alias, alias-definition, and malias to create
the alias name.
command Enter the original command syntax for which you want to configure the alias-name.
NOTE: You can enter the arguments with white spaces and must be enclosed
within double quotes—“ “.
Defaults None.
Command Modes
CONFIGURATION
ALIAS-DEFINITION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command-Line Reference Guide.
Version Description
9.12(0.0) Introduced on all the Dell EMC Networking OS platforms.
Usage
Information
● Users with privilege level 15 only can configure the alias-name. You can configure a maximum of 128
aliases.
● Single-line aliases accept a maximum of 128 bytes.
● User can configure up to nine arguments to the aliases—1 to 9. Repetition of arguments are allowed
and the system does not allow discontinuous arguments.
Control and Monitoring 83