CLI Guide

FIP Snooping
In a converged Ethernet network, a switch can operate as an intermediate Ethernet bridge to snoop on FIP packets during the
login process on Fibre Channel over Ethernet (FCoE) forwarders (FCFs). Acting as a transit FIP snooping bridge, the switch
uses dynamically created access control lists (ACLs) to permit only authorized FCoE traffic to transmit between an FCoE end-
device and an FCF.
Topics:
• clear fip-snooping database interface vlan
• clear fip-snooping statistics
• debug fip snooping
• debug fip snooping rx
• feature fip-snooping
• fip-snooping enable
• fip-snooping fc-map
• fip-snooping max-sessions-per-enodemac
• fip-snooping port-mode fcf
• fip-snooping port-mode fcoe-trusted
• show fip-snooping config
• show fip-snooping enode
• show fip-snooping fcf
• show fip-snooping statistics
• show fip-snooping system
• show fip-snooping vlan
• show fips status
clear fip-snooping database interface vlan
Clear FIP snooping information on a VLAN for a specified FCoE MAC address, ENode MAC address, or FCF MAC address, and
remove the corresponding ACLs FIP snooping generates.
Syntax
clear fip-snooping database interface vlan {vlan-id} enode {enode-mac-
address} | fcf {fcf-mac-address} | session {session-mac-address}
Parameters
enode-mac-
address
Enter the ENode MAC address of the session which has to be cleared.
fcf-mac-address Enter the FCF MAC address of the session which has to be cleared.
session-mac-
address
Enter the MAC address of the session which has to be cleared.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
17
FIP Snooping 599