CLI Guide

Maximum Shared Limit: 7667
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
----- Buffer Stats for Interface Te 1/5 Queue 6 -----
Maximum Shared Limit: 7667
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
----- Buffer Stats for Interface Te 1/6 Queue 6 -----
<output truncated for brevity>
Related
Commands
● clear hardware system-flow — clear the statistics from selected hardware components.
● show interfaces stack-unit — display information on all interfaces on a specific S-Series stack
member.
● show processes cpu (S-Series) — display the CPU usage information based on the processes running
in an S-Series.
● show system — display the current status of all the stack members or a specific member.
show hardware buffer service-pool
Displays the buffer details for the service pool. You can verify the total buffer allocated to the lossy and lossless traffic in the
service pool.
Syntax
show hardware buffer service-pool {buffer-info }
Parameters
buffer-info Enter the keyword buffer-info to view the buffer details for the service pool.
Command Modes
EXEC
EXEC Privilege
Command
History
Version Description
9.11(0.0) Introduced on the S6000, S6000–ON, S6100–ON and Z9100–ON.
Usage
Information
Use this command to view the buffer details of lossy and lossless traffic in the service pool.
Example
DellEMC#show hardware buffer service-pool buffer-info
------Buffer Details for Stack-Unit 1 portpipe 0 ------
-----------------------------------------------------------------
Service-Pool Configured Buffer(KB) Used Buffer(KB)
-----------------------------------------------------------------
SP0(Lossy) 9758 7760
SP1(Lossless) 3842 697
DellEMC#
show hardware drops
Displays internal drops on the specified interface or for a range of interface.
Syntax
show hardware drops interface interface
Parameters
drops
Enter the keyword drops to display internal drops.
interface
Enter any of the following keywords and the interface or interface range
information:
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
534 Debugging and Diagnostics