CLI Guide

PRIMARY OPERATING SYSTEM BOOT PARAMETERS:
========================================
No Operating System boot parameters specified!
SECONDARY OPERATING SYSTEM BOOT PARAMETERS:
========================================
boot device : flash
file name : systema (FTOS system://A Partition)
DEFAULT OPERATING SYSTEM BOOT PARAMETERS:
========================================
boot device : tftp
file name : PS-SI-9-0-0-566.bin
Management Etherenet IP address : 10.16.133.17
Mask : 255.255.0.0
Server IP address : 10.16.1.200
Default Gateway IP address : 10.16.1.254
BOOT_USER #
Related
Commands
boot_change— Change the primary, secondary, or default boot image configuration.
boot_zero — Erase the configured primary, secondary, or default boot image parameters.
show default-gateway
Display the IP address configured for the default gateway.
S6000
Syntax
show default-gateway
Command Modes BOOT_USER
Command
History
Version Description
9.10(0.0) Introduced on the S6100.
9.8(1.0) Introduced on the Z9100–ON.
9.0.2.0 Introduced on the S6000.
Example
BOOT_USER # show default-gateway
Gateway IP address: 10.16.100.254
BOOT_USER #
Related
Commands
default-gateway— Configure the IP address for the default gateway.
interface_management_ethernet_ip_address — Assign an IP address to the Management Ethernet
interface.
Boot Command Line Interface 343