Manualshelf

CLI Guide

ManualsBrandsDell ManualsAccess PlatformsOS9
151152153154155156157158159160
warmboot-failure-action
This CLI is used to define the system behavior in the event of a warmboot failure.
Syntax
warmboot-failure-action fastboot| normal-reload
Parameters
fastboot Do a fastboot on warmboot failure
normal-reload Do a normal reload on warmboot failure
Defaults normal-reload
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.12(0.0) Introduced on the S6000, S6100–ON and Z9100–ON
Usage
Information
Enter warmboot-failure-action fastboot to restart in fastboot mode in case there is a failure of
warmboot. Enter warmboot-failure-action normal-reload to restart in normal mode in case
there is a failure of warmboot.
write
Copy the current configuration to either the startup-configuration file or the terminal.
Syntax
write [memory [compressed] | terminal]
Parameters
memory Enter the keyword memory to copy the current running configuration to the
startup configuration file. This command is similar to the copy running-config
startup-config command.
compressed Enter the keyword compressed to write the operating configuration to the
startup-config file in the compressed mode.
terminal Enter the keyword terminal to copy the current running configuration to the
terminal. This command is similar to the show running-config command.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
Control and Monitoring 155