CLI Guide

Field Description
Topology Lists the topology of stack ports connected: Ring, Daisy chain, or Standalone.
Interface The unit/port ID of the connected stack port on this unit.
Link Speed Link Speed of the stack port (10 or 40) in Gb/s.
Admin Status The only currently listed status is Up.
Connection The stack port ID to which this unit’s stack port is connected.
Example
DellEMC#show system stack-ports
Topology: Ring
Interface Connection Link Speed Admin Link
(Gb/s) Status Status
---------------------------------------------------------
1/4 5/4 42 up up
1/12 2/0 42 up up
2/1 0/120 42 up up
2/4 5/120 42 up up
5/4 0/4 42 up up
5/12 2/4 42 up up
Example (Status)
DellEMC#show system stack-ports status
Topology: Ring
Interface Link Speed Admin Link
(Gb/s) Status Status
--------------------------------------------
0/4 42 up up
0/120 42 up up
2/0 42 up up
2/4 42 up up
5/4 42 up up
5/120 42 up up
Example
(Topology)
DellEMC#show system stack-ports topology
Topology: Ring
Interface Connection
---------------------
0/4 5/4
0/120 2/0
2/0 0/120
2/4 5/120
5/4 0/4
5/120 2/4
DellEMC#
Related
Commands
● reset stack-unit – resets the designated stack member.
● show hardware stack-unit – displays the data plane or management plane input and output statistics
of the designated component of the designated stack member.
● show system – displays the current status of all stack members or a specific member.
stack-unit priority
Configure the ability of a switch to become the management unit of a stack.
Syntax
stack-unit stack-number priority priority-value
Parameters
stack-number Enter the stack member unit identifier.
priority-value This preference parameter allows you to specify the management priority of one
backup switch over another, with 1 as the lowest priority and 14 being the highest.
1518 Stacking