CLI Guide

ip ssh connection-rate-interval
Configure the rate interval in which the maximum number of SSH connections can be attempted.
Syntax
ip ssh connection-rate-interval 1-5
Parameters
1-5 Enter the rate interval in which the maximum number of SSH connections can be
attempted. The range is from 1 to 5 minutes.
Defaults 1 minute
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.12(0.0) Introduced on the S6000–ON, S6100–ON and Z9100–ON.
ip ssh connection-rate-lockout
Configure a lockout period until which the SSH connections are blocked, after the SSH connection attempts reach the rate limit.
Syntax
ip ssh connection-rate-lockout 0—300
Parameters
0-300 Enter a lockout period in seconds. The range is from 0 to 300 seconds.
Defaults 0
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.12(0.0) Introduced on the S6000–ON, S6100–ON and Z9100–ON.
ip ssh hostbased-authentication
Enable hostbased-authentication for the SSHv2 server.
Syntax
ip ssh hostbased-authentication enable
To disable hostbased-authentication for SSHv2 server, use the no ip ssh hostbased-
authentication enable command.
Parameters
enable Enter the keyword enable to enable hostbased-authentication for SSHv2 server.
Defaults Disabled.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
Security 1395