CLI Guide

Len Mark Out ies Sent Rcvd Retra Retra
DHCP0 ACL0 0 1 1 1 1 1 25 25
DHCP0 IPMGR0 0 0 0 0 0 0 25 25
DHCP0 IPMGR1 0 0 0 0 0 0 25 25
DHCP0 IFMGR0 0 0 0 0 0 0 25 25
IPMGR0 NDPM0 0 0 0 0 0 0 60 60
IFMGR0 FEFD0 0 10 0 0 12 12 60 60
IFMGR0 SNMP0 0 1 0 0 1 1 60 60
IFMGR0 SFL_CP0 0 20 0 0 26 26 60 60
IFMGR0 PORTMIRR0 0 8 0 0 9 9 60 60
IFMGR0 EVENTTERMLOG0 0 1 0 0 1 1 60 60
IFMGR0 IPSECMGR0 0 8 0 0 11 11 60 60
IFMGR0 DHCP0 0 8 0 0 11 11 60 60
IFMGR0 IPMGR0 0 29 0 0 36 36 60 60
IFMGR0 IFAGT3 0 1 0 0 2 2 60 60
IFAGT3 IFMGR0 0 1 0 0 1 1 60 60
IFMGR0 OFMGR0 0 16 1 1 21 21 60 60
IFMGR0 ACL0 0 8 0 0 14 14 60 60
IFMGR0 VRRP0 0 10 0 0 17 17 60 60
IFMGR0 PIM0 0 1 0 0 1 1 5 5
IFMGR0 MACMGR0 0 0 0 0 0 0 60 60
IFMGR0 L2PM0 0 29 0 0 40 40 60 60
IFMGR0 DIFFSERV0 0 51 0 0 67 67 60 60
IFMGR0 RTM0 0 9 0 0 11 11 60 60
IFMGR0 LLDP0 0 12 0 0 12 12 60 60
IFMGR0 MRTM0 0 10 0 0 10 10 60 60
IFMGR0 IPMGR1 0 33 0 0 33 33 60 60
IFMGR0 LACP0 0 23 0 0 23 23 60 60
PORTMIRR0 ACL_AGENT2 0 0 0 0 0 0 50 50
IFMGR0 IGMP0 0 0 0 0 0 0 50 50
IFMGR0 IFAGT2 0 1 0 0 1 1 60 60
DellEMC#
show processes memory
Display memory usage information based on processes running in the S-Series or Z-Series system.
Syntax
show processes memory {management-unit | stack unit {unit-id | all |
summary}}
Parameters
management-unit Enter the keyword management-unit for CPU memory usage of the stack
management unit.
stack unit unit id Enter the keyword stack unit then a stack unit ID of the member unit for which
to display memory usage on the forwarding processor.
all Enter the keyword all for detailed memory usage on all stack members.
summary Enter the keyword summary for a brief summary of memory availability and usage
on all stack members.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
Control and Monitoring 137