CLI Guide

Example The following example shows the list of alias names configured and its corresponding definition:
DellEMC# show alias
-----------------------------------------------------------------
Alias Name Definition
-----------------------------------------------------------------
showipbr10 show ip interface brief | ….
showipbr40 show ip interface brief | ….
shboot show bootvar…
cr-vlan interface vlan $1 ..
-----------------------------------------------------------------
Total Alias Configured : 4
-----------------------------------------------------------------
The following example shows the detailed list of alias names configured on the system:
DellEMC# show alias details
------------------------------------------------------------------
Name: showipbr10
Definition:
show ip interface brief | grep tengig ignore-case
------------------------------------------------------------------
------------------------------------------------------------------
Name: showipbr40
Definition:
show ip interface brief | grep fortygig ignore-case
------------------------------------------------------------------
DellEMC#
The following example shows the details of a specific alias name configured on the system:
DellEMC# show alias details showipbr10
------------------------------------------------------------------
Name: showipbr10
Definition:
show ip interface brief | grep tengig ignore-case
------------------------------------------------------------------
DellEMC#
Related
Commands
● alias—configure shorter alias names for single-line command input.
show alarms
View alarms currently active in the system.
Syntax
show alarms [threshold]
Parameters
threshold (OPTIONAL) Enter the keyword threshold to display the temperature thresholds
in Celsius for each level.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
122 Control and Monitoring