Users Guide

Adding a Static IPV6 DHCP Snooping Binding Table
To add a static entry in the snooping database, use the following command.
● Add a static entry in the snooping binding table.
EXEC Privilege mode
ipv6 dhcp snooping binding mac address vlan-id vlan-id ipv6 ipv6-address interface
interface-type | interface-number lease value
Clearing the Binding Table
To clear the binding table, use the following command.
● Delete all of the entries in the binding table.
EXEC Privilege mode
clear ip dhcp snooping binding
Clearing the DHCP IPv6 Binding Table
To clear the DHCP IPv6 binding table, use the following command.
● Delete all of the entries in the binding table.
EXEC Privilege mode
clear ipv6 dhcp snooping binding
DellEMC# clear ipv6 dhcp snooping?
binding Clear the snooping binding database
Displaying the Contents of the Binding Table
To display the contents of the binding table, use the following command.
● Display the DHCP snooping information.
EXEC Privilege mode
show ip dhcp snooping
● Display the contents of the binding table.
EXEC Privilege mode
show ip dhcp snooping binding
View the DHCP snooping statistics with the show ip dhcp snooping command.
DellEMC#show ip dhcp snooping
IP DHCP Snooping : Enabled.
IP DHCP Snooping Mac Verification : Disabled.
IP DHCP Relay Information-option : Disabled.
IP DHCP Relay Trust Downstream : Disabled.
Database write-delay (In minutes) : 0
DHCP packets information
Relay Information-option packets : 0
Relay Trust downstream packets : 0
Snooping packets : 0
Packets received on snooping disabled L3 Ports : 0
Snooping packets processed on L2 vlans : 142
DHCP Binding File Details
Invalid File : 0
302
Dynamic Host Configuration Protocol (DHCP)