Release Notes
Table Of Contents
- Dell S6100–ON System Release Notes, OS Version 9.14(2.10)
- Document Revision History
- Requirements
- New Dell Networking OS Version 9.14(2.10) Features
- Restrictions
- Changes to the Default Behavior and CLI Syntax
- Documentation Corrections
- Deferred Issues
- Fixed Issues
- Known Issues
- Upgrading the ONIE Package for the S6100-ON System
- Upgrading the DIAG Package for the S6100-ON System
- Installing Dell EMC Networking OS on the S6100-ON using ONIE
- Upgrading the S6100-ON Dell EMC Networking OS Image using Dell EMC Networking OS CLI
- Upgrade the Boot Selector and Boot Flash Images from Dell EMC Networking OS
- Upgrade the CPLD Images
- Upgrading the SmartFusion Microcontroller Subsystem — SMF MSS-IAP
- Upgrading the SmartFusion Microcontroller Subsystem — SMF MSS-FPGA
- Upgrading the OOB-FPGA Image
- Uninstalling the Dell EMC Networking OS
- Installing a Third Party Operating System
- Contacting Dell EMC
Known S6100–ON 9.14(2.10) Software Issues
The following caveats are open in Dell EMC Networking OS version 9.14(2.10):
None.
Upgrading the ONIE Package for the S6100-ON System
To upgrade the ONIE package, use one of the following two processes:
● Zero touch (dynamic): Copy the update ONIE installer for your system to the TFTP or HTTP server. Configure the
DHCP options using the ONIE specifications shown at the following link: https://github.com/opencomputeproject/onie/
wiki/Design-Spec-SW-Updating-ONIE.
● Manual: Copy the image onto the TFTP or HTTP server and boot into ONIE. Update the ONIE using the onie-self-
update command, then download and run an ONIE updater image (onie-updater-x86_64-s6100_c2538-r0 ). The supported
URL types are: HTTP, FTP, TFTP, and FILE.
To upgrade ONIE, perform the following steps:
1. Reboot the system. During the reboot process, the system displays the following message prompting you to press the Esc
key in order to stop the autoboot process:
Press Esc to stop autoboot ... 5
Grub 1.99~rc1 (Dell EMC)
Built by build at bsdlab on Tue_May_18_10:41:12_UTC_2021
S6100 Boot Flash Label 3.25.2.14 NetBoot Label 3.25.2.14
2. At this prompt message, press the Esc key. The following menu appears:
Grub 1.99~rc1 (Dell EMC)
Built by root at ubuntu on Tue_May_18_10:41:12_UTC_2021
S6100-ON Boot Flash Label 3.25.2.14 NetBoot Label 3.25.2.14
+----------------------------------------------------------------------------+
|Dell EMC Networking OS |
|Dell EMC-Boot Line Interface |
|DIAG-OS |
|ONIE |
+-----------------------------------------------------------------------------+
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, 'f' to boot Dell EMC Networking OS, 'b' to
go to
BLI, 'o' to boot ONIE, 'd' to boot DIAG-OS, 'e' to edit the commands
before booting or 'c' for a command-line.
3. From the menu, choose the ONIE option.
NOTE: To choose an option from the menu, select one of the options using the up or down arrow key and press Enter.
The following menu appears:
GNU GRUB version 1.99~rc1
+-------------------------------------------------+
| ONIE: Install OS |
| ONIE: Rescue |
| ONIE: Uninstall OS |
|*ONIE: Update ONIE |
| ONIE: Embed ONIE |
| EDA-DIAG |
| |
+-------------------------------------------------+
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, `e' to edit the commands
before booting or `c' for a command-line.
8