Users Guide

● For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the
slot/port/subport information.
● For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then
the slot/port information.
● For a port channel interface, enter the keywords port-channel then a
number.
● For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Added support for VRF. Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.2(0.2) Introduced on the Z9000.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
Usage
Information
The following describes the show isis traffic command shown in the following example.
Item Description
Level-1/Level-2
Hellos (sent/
rcvd)
Displays the number of Hello packets sent and received.
PTP Hellos
(sent/rcvd)
Displays the number of point-to-point Hellos sent and received.
Level-1/Level-2
LSPs sourced
(new/refresh)
Displays the number of new and refreshed LSPs.
Level-1/Level-2
LSPs flooded
(sent/rcvd)
Displays the number of flooded LSPs sent and received.
Level-1/Level-2
LSPs CSNPs
(sent/ rcvd)
Displays the number of CSNP LSPs sent and received.
Level-1/Level-2
LSPs PSNPs
(sent/ rcvd)
Displays the number of PSNP LPSs sent and received.
892 Intermediate System to Intermediate System (IS-IS)