Users Guide

define interface-range test twentyFiveGigE 1/1 - 1/3, twentyFiveGigE
1/5 - 1/7,
twentyFiveGigE 1/11 - 1/18
DellEMC(config)# interface range macro test
DellEMC(config-if-range-tf-1/1-1/3,tf-1/5-1/7,tf-1/11-1/18)#
DellEMC(config)# define interface-range test HundredGigE 1/49 - 1/50,
HundredGigE 1/52 - 1/53
DellEMC# show running-config | grep define
define interface-range test HundredGigE 1/49 - 1/50, HundredGigE 1/52 -
1/53
DellEMC(config)# interface range macro test
DellEMC(config-if-range-hu-1/49-1/50,hu-1/52-1/53)#
Related
Commands
● interface range – configure a range of command (bulk configuration).
● interface range macro name – run an interface range macro.
interface range macro name
Run the interface-range macro to automatically configure the pre-defined range of interfaces.
Syntax
interface range macro name
Parameters
name Enter the name of an existing macro.
Defaults None
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.0 Introduced
686 Interfaces