Users Guide

Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the S-Series.
Usage
Information
You cannot enter this command on a Master or Standby unit.
The system reboots when the off-line diagnostics complete. This reboot is an automatic process. A
warning message appears when the offline stack-unit command is implemented.
Warning - Diagnostic execution will cause stack-unit to reboot after
completion of diags.
Proceed with Offline-Diags [confirm yes/no]:y
You cannot enter this command on a unit which is already online.
The system which is currently offline reboots when the online command is given.
show diag
Display the diagnostic information.
Syntax
show diag {information | stack-unit number [detail [interval] | summary] |
testcase stack-unit number [interactive | level0 | level1 | level2]}
Parameters
information Enter the keyword information to display diagnostic information.
stack-unit
number
Enter the keywords stack-unit then the stack-unit number to display diagnostic
details of the specific stack unit.
detail Enter the keyword detail to display diagnostic information in detail.
summary Enter the keyword summary to display a summary of diagnostic information.
testcase Enter the keyword testcase to display the list of diagnostic test cases. To display
the diagnostic test cases of the particular level, use the keywords interactive,
level0, level1, level2 after the keyword testcase.
Defaults None
Command Modes EXEC Privilege
Example
DellEMC#show diag information
Diag information:
Diag software image version:
9.8(1.0)
-------------------------------------------------------------------
stack-unit Member 1: No Unit diags executed yet (stack-unit not
Offline).
-------------------------------------------------------------------
DellEMC#show diag testcase stack-unit 1
**************************** Z9100 Diagnostics Test
*************************
Test ID Test Description Test Level
------- ---------------- ----------
1 SMARTFUSIONFPGAACCESSTEST Level0
2 CPLDACCESSTEST Level0
Debugging and Diagnostics 511