Users Guide

Usage
Information
In the runtime CLI, use the ip address command in INTERFACE mode to change the Management
interface’s IP address.
To view the current IP address configured on the Management interface, enter the show interfaces
management ethernet command
Related
Commands
show_default-gateway — Display the IP address configured for the default gateway.
show_interface_mangement_ethernet— Display the IP address configured for the Management
interface.
NVRAM erase
Erase all NVRAM contents alone.
Syntax nvram erase
Parameters
mac-address
Enter a MAC address in standard format.
Command Modes BOOT_ADMIN
Command
History
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.10(0.0) Introduced on the S6100.
9.8(1.0) Introduced on the Z9100–ON.
9.0.2.0 Introduced on the S6000.
Usage
Information
Use this command to assign a MAC address if FTOS cannot find a default MAC address.
Example
BOOT_USER # BOOT_ADMIN # nvram erase
Are you sure (y/n)? : yes
Erasing NVRAM sectors....Erasing NvRam of size 1024 KB ... DONE
reload
Exit from this mode and reload Dell EMC Networking OS.
Syntax
reload
Command Modes BOOT_USER
Command
History
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.10(0.0) Introduced on the S6100.
9.8(1.0) Introduced on the Z9100–ON.
9.0.2.0 Introduced on the S6000.
Boot Command Line Interface 337