Users Guide

Parameters
ip-address
Enter the IP address of the gateway router in dotted decimal format (A.B.C.D).
Command Modes BOOT_USER
Command
History
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.10(0.0) Introduced on the S6100.
9.8(1.0) Introduced on the Z9100–ON.
9.0.2.0 Introduced on the S6000.
Usage
Information
Use the show default-gateway command to view the current default gateway.
Related
Commands
show_default-gateway— Change the primary, secondary, or default boot image configuration.
etheraddr <macaddr>
Assign the management port MAC address.
Syntax etheraddr <macaddr>
Parameters
mac-address
Enter a MAC address in standard format.
Command Modes BOOT_ADMIN
Command
History
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.0.2.0 Introduced on the S6000.
Usage
Information
Use this command to assign a MAC address if FTOS cannot find a default MAC address.
Example
BOOT_ADMIN # etheraddr aa:aa:aa:aa:aa:aa
<Macaddr> XX:xx:xx:xx:xx:xx
No defaults for this
ignore enable-password
Reload the system software without the enable password configured.
Syntax
ignore enable-password
Command Modes BOOT_USER
Command
History
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.10(0.0) Introduced on the S6100.
Boot Command Line Interface 335