Users Guide

Examples
To display the list of ACL ranges:
DellEMC# show aclrange
INDEX PROFILE_NAME TYPE INVERSE LOWER UPPER REF_CNT
THRESHOLD THRESHOLD
--------------------------------------------------------------------------------------
1 dport1 l4dstport No 80 89 0
2 dport2 l4dstport No 3000 3500 2
3 dportgt5000 l4dstport No 5001 65535 1
4 ip-mtu-782 mtu No 782 782 1
5 sport1 l4srcport No 1024 65535 1
6 sportinv1 l4srcport Yes 2500 2500 1
To display the list of ACLs using the configured range profiles:
DellEMC# show aclrange access-list
Profile-name type Acl-name seqno
abc v4 abc 5
V4 zyx 10
V6 def 8
bgp V6 ghi 8
show ip accounting access-list
Display the IP access-lists created on the switch and the sequence of filters.
Syntax
show ip accounting {access-list access-list-name | cam_count} interface
interface [vrf vrf-name]show ip accounting access-list [access-list-name
[cam-count | interface interface [cam_count] | vrf {management | vrf-name}
[cam_count] {in | out}]
Parameters
access-list-name Enter the name of the ACL to be displayed.
cam_count List the count of the CAM rules for this ACL.
interface
interface
Enter the keyword interface then the one of the following keywords and the
interface information:
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port[/subport] information.
● For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE
then the slot/port[/subport] information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port/subport information.
● For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the
slot/port/subport information.
● For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then
the slot/port information.
● For a port channel interface, enter the keywords port-channel then a
number.
● For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.
in | out Identify whether ACL is applied on the ingress or egress side.
vrf vrf-name (Optional) Enter the keyword vrf and then the name of the VRF to view the IP
accounting information on either a default or a non-default VRF.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
194 Access Control Lists (ACL)