Users Guide

Field Description
“Configured
hello...”
Displays the settings for hello time, max age, and forward delay.
“We are...” States whether this bridge is the root bridge for the STG.
“Current root...” Lists the bridge priority and MAC address for the root bridge.
“Topology
flag...”
States whether the topology flag and the detected flag were set.
“Number of...” Displays the number of topology changes, the time of the last topology change, and
on what interface the topology change occurred.
“Timers” Lists the values for the following bridge timers: hold time, topology change, hello
time, max age, and forward delay.
“Times” List the number of seconds since the last:
● hello time
● topology change
● notification
● aging
“Port 1...” Displays the Interface type slot/port information and the status of the interface
(Disabled or Enabled).
“Port path...” Displays the path cost, priority, and identifier for the interface.
“Designated
root...”
Displays the priority and MAC address of the root bridge of the STG that the
interface belongs.
“Designated
port...”
Displays the designated port ID.
Example
DellEMC# show spann 0
Executing IEEE compatible Spanning Tree Protocol
Bridge Identifier has priority 32768, Address 0001.e800.0a56
Configured hello time 2, max age 20, forward delay 15
We are the root of the spanning tree
Current root has priority 32768 address 0001.e800.0a56
Topology change flag set, detected flag set
Number of topology changes 1 last change occurred 0:00:05 ago
from twentyFiveGigE 1/1
Timers:hold 1, topology change 35
hello 2, max age 20, forward_delay 15
Times:hello 1, topology change 1, notification 0, aging 2
Port 26 (twentyFiveGigE 1/2) is Forwarding
Port path cost 4, Port priority 8, Port Identifier 8.26
Designated root has priority 32768, address 0001.e800.0a56
Designated bridge has priority 32768, address 0001.e800.0a56
Designated port id is 8.26, designated path cost 0
Timers: message age 0, forward_delay 0, hold 0
Number of transitions to forwarding state 1
BPDU: sent:18, received 0
The port is not in the portfast mode
Port 27 (twentyFiveGigE 1/3) is Forwarding
Port path cost 4, Port priority 8, Port Identifier 8.27
Designated root has priority 32768, address 0001.e800.0a56
Designated bridge has priority 32768, address 0001.e800.0a56
Designated port id is 8.27, designated path cost 0
Timers: message age 0, forward_delay 0, hold 0
Number of transitions to forwarding state 1
BPDU: sent:18, received 0
The port is not in the portfast mode
Port 28 (twentyFiveGigE 1/4) is Forwarding
1568
Spanning Tree Protocol (STP)