Users Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

1541

clear storm-control pfc statistics

Clears the discard state count and cleared count statistics. If the queue is in discard state during clear, the discard state count

will start from 1.

Syntax

clear storm-control pfc statistics stack-unit {unit-number} port-set

{portpipe-number}

Parameters

unit-number

Enter the stack unit number.

portpipe-number

Enter the port set number.

Defaults None

Command Modes EXEC Privilege.

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.12(1.0) Introduced on the S5048F–ON.

9.11(0.0) Introduced on the S6000, S6000–ON, S6100–ON, Z9100–ON.

Usage

Information

The clear storm-control pfc statistics command is used to clear the discard count and

cleared count statistics on the specified stack unit and port set.

Commands

show storm-control pfc statistics — used to view the statistical data of the PFC storm on the specified

stack unit and the port set.

show storm-control broadcast

Display the storm control broadcast configuration.

Syntax

show storm-control broadcast [interface]

Parameters

interface

(OPTIONAL) Enter one of the following interfaces to display the interface-specific

storm control configuration:

● For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port/subport information.

● For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE

then the slot/port[/subport] information.

● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the

slot/port/subport information.

● For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the

slot/port/subport information.

● For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then

the slot/port information.

Defaults none

Command Modes

● EXEC

● EXEC Privilege