Users Guide

Related
Commands
show storm-control pfc status — view the status of the PFC storm on a stack unit with a specific port
set.
show storm-control pfc statistics
You can view the statistical details of the PFC storm on a stack unit with specified port set.
Syntax
show storm-control pfc statistics stack-unit {unit-number} port-set
{portpipe-number
Parameters
unit-number Enter the stack unit number.
portpipe-number Enter the port set number.
Defaults None
Command Modes EXEC Privilege.
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6000, S6000–ON, S6100–ON, Z9100–ON.
Usage
Information
The show storm-control pfc statistics command is used to view the statistical data of the
PFC storm on the specified stack unit and the port set.
Example
DellEMC#show storm-control pfc statistics stack-unit 1 port-set 0
-----------------------------------------------------------------------
Interface Priority Discard State Discard State Clear Count
Count forced No rxPfc
-----------------------------------------------------------------------
Tf 1/1 3 2 0 0
4 2 0 0
5 2 0 0
6 2 0 0
Tf 1/1 3 0 0 0
4 0 0 0
5 0 0 0
6 0 0 0
Tf 1/2 3 2 0 0
4 2 0 0
5 2 0 0
6 2 0 0
Tf 1/3 3 2 0 0
4 2 0 0
5 2 0 0
6 2 0 0
Tf 1/4 3 2 0 0
4 2 0 0
5 2 0 0
6 2 0 0
Tf 1/5 3 2 0 0
4 2 0 0
5 2 0 0
6 2 0 0
Tf 1/8 3 0 0 0
4 0 0 0
5 0 0 0
6 0 0 0
DellEMC#
1548
Storm Control