Users Guide

Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.12(0.0) Introduced on the S6000–ON, S6100–ON and Z9100–ON.
ip ssh connection-rate-lockout
Configure a lockout period until which the SSH connections are blocked, after the SSH connection attempts reach the rate limit.
Syntax
ip ssh connection-rate-lockout 0—300
Parameters
0-300 Enter a lockout period in seconds. The range is from 0 to 300 seconds.
Defaults 0
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.12(0.0) Introduced on the S6000–ON, S6100–ON and Z9100–ON.
ip ssh hostbased-authentication
Enable hostbased-authentication for the SSHv2 server.
Syntax
ip ssh hostbased-authentication enable
To disable hostbased-authentication for SSHv2 server, use the no ip ssh hostbased-
authentication enable command.
Parameters
enable Enter the keyword enable to enable hostbased-authentication for SSHv2 server.
Defaults Disabled.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
1420 Security