Users Guide

Example
The following example assigns the color map, bat-enclave-map, to interfacetw 1/1.
DellEMC(conf)# int tw 1/1
DellEMC(conf-if-tf-1/1)# qos dscp-color-policy bat-enclave-map
DellEMC(conf-if-tf-1/1)#
Related
Commands
● dscp— sets the number of specific DSCP values for color map profile to yellow or red.
● qos dscp-color-map— configures the DSCP color map.
show qos dscp-color-policy
Display DSCP color policy configuration for one or all interfaces.
Syntax show qos dscp-color-policy {summary [interface] | detail {interface}}
Parameters
summary Enter the summary keyword to display summary information about a color policy
on one or more interfaces.
Detail Enter the detail keyword to display detailed information about a color policy on
one or more interfaces.
interface Enter the name of the interface that has color policy configured.
Defaults None
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5.0.0 Introduced on the Z9000, S6000, S4820T, S4810, and MXL.
Example
Display summary information about a color policy on one or more
interfaces.
DellEMC# show qos dscp-color-policy summary
Interface dscp-color-map
Tf 1/10 mapONE
Tf 1/11 mapTWO
Display summary information about a color policy on a specific interface.
DellEMC# show qos dscp-color-policy summary tw 1/10
Interface dscp-color-map
Tf 1/10 mapONE
Displayed detailed color policy information on an interface.
Quality of Service (QoS) 1295