Users Guide

Field Description
Status (Allowed
ports)
Indicates if the input policy map configuration on an interface belonging to a stack-
unit/port-pipe is successful — Allowed (n) — or not successful — Exception. The
allowed number (n) indicates the number of ports in that port-pipe on which the
Policy Map can be applied successfully.
NOTE: In a Layer 2 Policy Map, IPv4/IPv6 rules are not allowed; therefore, the output contains only
L2ACL CAM partition entries.
Example
DellEMC# test cam-usage service-policy input pmap_l2 stack-unit all
For a L2 Input Policy Map pmap_l2, the output must be as follows,
stack-unit|Portpipe|CAM Partition|Available CAM|Estimated CAM per Port |
Status
| | | |per Port |
(Allowed ports)
0 0 L2ACL 500
200 Allowed (2)
0 1 L2ACL 100 200
Exception
1 0 L2ACL 1000 200
Allowed (5)
1 1 L2ACL 0 200
Exception
…
…
…
13 1 L2ACL 400 200 Allowed
(2)
DellEMC#
DellEMC# test cam-usage service-policy input pmap_l2 stack-unit all
For a L2 Input Policy Map pmap_l2, the output must be as follows,
stack-unit|Portpipe|CAM Partition|Available CAM|Estimated CAM per Port |
Status
| | | |per Port |
(Allowed ports)
0 0 L2ACL 500
200 Allowed (2)
0 1 L2ACL 100 200
Exception
1 0 L2ACL 1000 200
Allowed (5)
1 1 L2ACL 0 200
Exception
…
…
…
13 1 L2ACL 400 200 Allowed
(2)
DellEMC#
DellEMC# test cam-usage service-policy input pmap_l2 stack-unit all
Stack-unit | Portpipe | Tile | CAM Partition | Available CAM | Estimated CAM per Port | Status
------------------------------------------------------------------------------------------
1282
Quality of Service (QoS)