Users Guide

Version Description
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
6.1.1.1 Introduced on the E-Series.
Example
DellEMC# show qos wred-profile
Wred State: Enabled
Wred-profile-name min-threshold max-threshold max-drop-
rate
wred_drop 0 0 100
wred_fiftyg_y 273 2731 75
wred_fiftyg_g 273 2731 50
wred_fortyg_y 273 2731 50
wred_fortyg_g 273 2731 25
wred_hundredg_y 273 2731 50
wred_hundredg_g 273 2731 25
wred_teng_y 273 2731 100
wred_teng_g 273 2731 50
wred_twentyg_y 273 2731 100
wred_twentyg_g 273 2731 75
service-class buffer shared-threshold-weight
Create a service class and associate the threshold weight of the shared buffer with each of the queues per port in the egress
direction.
Syntax
[No] Service-class buffer shared-threshold-weight {[queue0 number] ||
[queue1 number] || [queue2 number] || [queue3 number] || [queue4 number] ||
[queue5 number] || [queue6 number] || [queue7 number]}
Parameters
buffer Define the shared buffer settings
shared-
threshold-weight
Specify the weight of a queue for the shared buffer space
queue 0 to queue
7
To apply the shared-threshold weight, specify the queue number
number Enter a weight for the queue on the shared buffer as a number in the range of 1 to
11.
Default The default threshold weight on the shared buffer for each queue is 9. Therefore, each queue can
consume up to 66.67 percent of available shared buffer by default.
Command Modes INTERFACE mode
Quality of Service (QoS) 1279