Users Guide

Related
Commands
● ip access-list extended — configures an extended IP ACL.
● ip access-list standard — configures a standard IP ACL.
● match ip access-group — configures the match criteria based on the access control list (ACL).
● match ip precedence — identifies the IP precedence values as match criteria.
● match ip dscp — configures the match criteria based on the DSCP value.
● match mac access-group — configures a match criterion for a class map based on the contents of
the designated MAC ACL.
● match mac dot1p — configures a match criterion for a class map based on a dot1p value.
● match mac vlan — configures a match criterion for a class map based on VLAN ID.
● service-queue — assigns a class map and QoS policy to different queues.
● show qos class-map — views the current class map information.
clear qos statistics
Clear qos statistics clears statistics from show qos statistics.
Syntax
clear qos statistics interface-name
Parameters
interface-name Enter one of the following keywords:
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port/subport information.
● For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE
then the slot/port[/subport] information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port/subport information.
● For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the
slot/port/subport information.
● For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then
the slot/port information.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
Quality of Service (QoS) 1249