Release Notes
Table Of Contents
- Dell EMC System S3048–ON 9.14(2.9P1) Release Notes
- Document Revision History
- Supported Hardware
- Supported Software
- New Dell EMC Networking OS Version 9.14(2.9) Features
- Restrictions
- Changes to Default Behavior and CLI Syntax
- Documentation Corrections
- Deferred Issues
- Fixed Issues
- Known Issues
- Upgrading the sub-components
- Upgrading ONIE on the S3048-ON
- Installing Dell EMC Networking OS on the S3048-ON using ONIE
- Upgrading the S3048-ON Dell EMC Networking OS Image using the Dell EMC Networking OS CLI
- Uninstalling Dell EMC Networking OS on the S3048-ON
- Installing a Third Party Operating System
- Support Resources
Category Description
Work around
Work around describes a mechanism for circumventing, avoiding, or recovering from the issue. It might
not be a permanent solution.
Issues listed in the “Closed Caveats” section should not be present, and the work-around is unnecessary,
as the version of code for which this release note is documented has resolved the caveat.
Known S3048–ON 9.14(2.9) Software Issues
The latest information related to Open Caveats is available on support site through the BugTrack search tool.
NOTE: You must have a user account to access the BugTrack tool.
To use the search tool:
1. Go the Main Customer Support page: https://www.force10networks.com/csportal20/Main/SupportMain.aspx.
2. Log in.
3. Click the BugTrack link, located in the Quick Links menu directly below the login bar.
This takes you to the BugTrack search page: https://www.force10networks.com/csportal20/BugTrack/SearchIssues.aspx.
4. Enter for a specific PR or select an Dell EMC Networking OS version, platform, severity, or category to get a list of PRs.
5. Click the Search button.
6. Click the PR number to view specific PR details.
The PR (or PRs) appears on the page below the tool.
The following caveats are open in Dell EMC Networking OS version 9.14(2.9):
None.
Upgrading the sub-components
Ensure to upgrade the sub-components in the following order and reload the switch, where necessary, before proceeding with
the next sub-component upgrade.
1. Upgrade the BIOS or Boot-selector - using the upgrade boot bootselector-image stack-unit 1 booted
command.
2. Upgrade the GRUB or Bootflash - using the upgrade boot bootflash-image stack-unit 1 booted command.
3. Upgrade the CPLD - using the upgrade fpga-image system cpld stack-unit 1 booted command.
Upgrade the BIOS or Boot Selector
To upgrade the BIOS or Boot Selector from Dell EMC Networking OS, perform the following steps:
1. Upgrade the S3048-ON Boot Selector image.
EXEC Privilege
upgrade boot bootselector-image stack-unit [<id> | all] [booted | flash: | ftp: | scp: |
tftp: | usbflash:]
Dell EMC Networking OS version 9.14(2.9) requires S3048-ON Boot Selector image version 3.24.0.0-11. The booted option is
used to upgrade the Boot Selector image to the image version packed with the loaded Dell EMC Networking OS image. The
Boot Selector image version packed with the loaded Dell EMC Networking OS can be found using the show os-version
command in EXEC Privilege mode.
DellEMC#upgrade boot bootselector-image stack-unit 1 booted
Current Boot information in the system:
================================================================
Card BootSelector Current Version New Version
----------------------------------------------------------------
Unit1 Boot Selector 3.24.0.0-9 3.24.0.0-11
7