Release Notes

reload
Command : reload
Mode : EXEC PRIVILEGE
DellEMC#reload
Proceed with reload [confirm yes/no]: y
7. Verify the S3048 ON has been upgraded to the Dell EMC Networking OS version 9.14(2.9).
EXEC Privilege
show version
DellEMC#show version
Dell EMC Real Time Operating System Software
Dell EMC Operating System Version: 2.0
Dell EMC Application Software Version: 9.14(2.9)
Copyright (c) 1999-2020 by Dell EMC Inc. All Rights Reserved.
Build Time: Thu Dec 10 10:20:04 2020
Build Path: /build/build01/SW/SRC
Dell EMC Networking OS uptime is 3 day(s), 21 hour(s), 3 minute(s)
System image file is "system://A"
System Type: S3048-ON
Control Processor: Intel Rangeley with 2 Gbytes (2127654912 bytes) of memory, core(s)
2.
8G bytes of boot flash memory.
1 52-port GE/TE (SG-ON)
48 GigabitEthernet/IEEE 802.3 interface(s)
4 Ten GigabitEthernet/IEEE 802.3 interface(s)
DellEMC#
Uninstalling Dell EMC Networking OS on the S3048-ON
To uninstall the Dell EMC Networking OS version 9.14(2.9) from the S3048-ON device, perform the following steps:
1. Reboot the system. During the reboot process, the system displays the following message prompting you to press the Esc
key in order to stop the auto-boot process:
Version 2.16.1242. Copyright (C) 2020 American Megatrends, Inc.
BIOS Date: 12/10/2020 01:14:04 15:25:58 Ver: 0ACBZ018
Press DEL or F2 to enter setup.
Grub 1.99~rc1 (Dell EMC)
Built by root at ubuntu on Thu_Dec_10_14:42:47_UTC_2020
S3000ON Boot Flash Label 3.24.2.9 NetBoot Label 3.24.2.9
Press Esc to stop autoboot ... 5
2. At this prompt message, press the Esc key. The following menu appears:
+----------------------------------------------------------------------------+
| Dell EMC Networking OS
| Dell EMC-Boot Line Interface
| DELL-DIAG
| ONIE
+----------------------------------------------------------------------------+
3. From the menu, choose the ONIE option.
NOTE:
To choose an option from the menu, highlight one of the options using the up or down arrow key and press
Enter.
16