CLI Guide

Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.13(0.0) Introduced on the S3100 series, S3048–ON, S4048–ON, S4048T-ON, S5000,
S6000, S6000–ON, S6100–ON, C9010, and the Z9500.
9.12(1.0) Introduced on the S5048F–ON.
9.11(2.5) Introduced the ipv6 route bfd command on the Z9100–ON.
Example
DellEMC(conf)#ipv6 route bfd
DellEMC(conf)#ipv6 route bfd vrf vrf1 prefix-list p6_le
neighbor bfd
Explicitly enable or disable a BFD session with a BGP neighbor or a BGP peer group.
Syntax
neighbor {ip-address | ipv6-address | peer-group-name} bfd
Parameters
ip-address Enter the IP address of the BGP neighbor that you want to explicitly enable for
BFD sessions in dotted decimal format (A.B.C.D).
peer-group-name Enter the name of the peer group that you want to explicitly enable for BFD
sessions.
Defaults None
Command Modes ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.13(0.0) Introduced support for enabling BFD on non-default VRFs for IPv4 BGP, default,
and non-default VRFs for IPv6 BGP on the S3100 series, S3048–ON, S4048–ON,
S4048T-ON, S5000, S6000, S6000–ON, S6010–ON, S6100–ON, C9010, Z9500,
and Z9100–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.8.0 Introduced on the S4810.
8.4.1.3 Introduced on the E-Series.
Bidirectional Forwarding Detection (BFD) 335