Release Notes

In addition, you can order the following Dell EMC C9010 hardware components:
● Up to three additional PSUs for redundancy or additional power
● One full-width C9000 Series RPM
● Half-width line cards:
○ 6-Port 40 Gigabit Ethernet QSFP+
○ 24-Port 1/10 Gigabit Ethernet SFP+
○ 24-Port 1/10 Gigabit Ethernet Base-T RJ-45
● SFP+ optics
● QSFP+ optics
● SFP+ direct attach copper (DAC) cables
●
QSFP+ DAC cables
● DB-9 adapter
● Dell EMC ReadyRails™ kit (#1 and #2 Phillips and flat-tipped screwdrivers required) with four cage nuts
● Rack mount tray
● C1048P port extenders (PEs) for use with the C9010
● N20xx, N30xx series switches which you can convert to port extenders.
C1048P Hardware
The following hardware is shipped with the base C1048P package:
● One C1048P chassis
● One rack-mount kit for rack installation, including two mounting brackets, bolts, and cage nuts
N20xx Hardware
The following hardware is shipped in the base N20xx package:
● One N2024, N2024P, N2048, or N2048P chassis
● One rack-mount kit for rack installation, including two mounting brackets, bolts, and cage nuts
● One set of self-adhesive rubber pads for the free-standing switch
N30xx Hardware
The following hardware is shipped in the base N30xx package:
● One N3024, N3024P, N3048, N3048P, or N3024F chassis
● One ReadyRail kit for rack installation, including two mounting brackets, bolts, and cage nuts
● One set of self-adhesive rubber pads for the free-standing switch
NOTE:
You can use the optional module on the N30xx with 10G BASE-T or SFP+ module as PE uplink to the control bridge
(C9010).
New in This Release
The following features are integrated into the Dell EMC Networking 9.14.2 branch through this release:
None.
2