Reference Guide

SNMPv2-
SMI::enterprises.6027.3.9.1.5.1.11.1.1.4.100.100.100.0.24.1.4.10.1.1.1.1.4.10.1.1.1 =
Gauge32: 0
SNMPv2-
SMI::enterprises.6027.3.9.1.5.1.11.1.1.4.100.100.100.0.24.1.4.20.1.1.1.1.4.20.1.1.1 =
Gauge32: 0
SNMPv2-
SMI::enterprises.6027.3.9.1.5.1.11.1.1.4.100.100.100.0.24.1.4.30.1.1.1.1.4.30.1.1.1 =
Gauge32: 0
SNMPv2-SMI::enterprises.6027.3.9.1.6.0 = Gauge32: 2048
SNMPv2-SMI::enterprises.6027.3.9.1.7.0 = Gauge32: 1
SNMPv2-SMI::enterprises.6027.3.9.1.8.0 = Gauge32: 2047
MIB Support for entAliasMappingTable
Dell EMC Networking provides a method to map the physical interface to its corresponding ifindex value. The
entAliasMappingTable table contains zero or more rows, representing the logical entity mapping and physical component
to external MIB identifiers. The following table lists the related MIB objects:
Table 119. MIB Objects for entAliasMappingTable
MIB Object OID Description
entAliasMappingTable 1.3.6.1.2.1.47.1.3.2 Contains information about
entAliasMapping table.
entAliasMappingEntry 1.3.6.1.2.1.47.1.3.2.1 Contains information about a particular
logical entity.
entAliasLogicalIndexOrZero 1.3.6.1.2.1.47.1.3.2.1.1 Contains a non–zero value and identifies
the logical entity named by the same
value of entLogicalIndex.
entAliasMappingIdentifier 1.3.6.1.2.1.47.1.3.2.1.2 Identifies a particular conceptual
row associated with the
indicated entPhysicalIndex and
entLogicalIndex pair.
Viewing the entAliasMappingTable MIB
● To view the entAliasMappingTable generated by the system, use the following command.
snmpwalk -v 2c -c public -On 10.16.150.97 1.3.6.1.2.1.47.1.3.2.1
.1.3.6.1.2.1.47.1.3.2.1.2.5.0 = OID: .1.3.6.1.2.1.2.2.1.1.2097157
.1.3.6.1.2.1.47.1.3.2.1.2.9.0 = OID: .1.3.6.1.2.1.2.2.1.1.2097669
.1.3.6.1.2.1.47.1.3.2.1.2.13.0 = OID: .1.3.6.1.2.1.2.2.1.1.2098181
.1.3.6.1.2.1.47.1.3.2.1.2.17.0 = OID: .1.3.6.1.2.1.2.2.1.1.2098693
.1.3.6.1.2.1.47.1.3.2.1.2.21.0 = OID: .1.3.6.1.2.1.2.2.1.1.2099205
.1.3.6.1.2.1.47.1.3.2.1.2.25.0 = OID: .1.3.6.1.2.1.2.2.1.1.2099717
.1.3.6.1.2.1.47.1.3.2.1.2.29.0 = OID: .1.3.6.1.2.1.2.2.1.1.2100228
.1.3.6.1.2.1.47.1.3.2.1.2.30.0 = OID: .1.3.6.1.2.1.2.2.1.1.2100356
.1.3.6.1.2.1.47.1.3.2.1.2.31.0 = OID: .1.3.6.1.2.1.2.2.1.1.2100484
MIB Support for LAG
Dell EMC Networking provides a method to retrieve the configured LACP information (Actor and Partner). Actor (local
interface) is to designate the parameters and flags pertaining to the sending node, while the term Partner (remote interface)
is to designate the sending node’s view of its peer parameters and flags. LACP provides a standardized means for exchanging
information, with partner systems, to form a link aggregation group (LAG). The following table lists the related MIB objects:
Simple Network Management Protocol (SNMP)
895