Reference Guide

Table 109. MIB Objects for Copying Configuration Files via SNMP (continued)
MIB Object OID Object Values Description
2 = running-config
3 = startup-config
● If copySrcFileType is
running-config or startup-
config, the default
copySrcFileLocation is
flash.
● If copySrcFileType is
a binary file, you
must also specify
copySrcFileLocation and
copySrcFileName.
copySrcFileLocation .1.3.6.1.4.1.6027.3.5.1.1.1.1.3
1 = flash
2 = slot0
3 = tftp
4 = ftp
5 = scp
6 = usbflash
Specifies the location of
source file.
● If copySrcFileLocation
is FTP or SCP,
you must specify
copyServerAddress,
copyUserName, and
copyUserPassword.
copySrcFileName .1.3.6.1.4.1.6027.3.5.1.1.1.1.4 Path (if the file is not in
the current directory) and
filename.
Specifies name of the file.
● If copySourceFileType
is set to running-
config or startup-config,
copySrcFileName is not
required.
copyDestFileType .1.3.6.1.4.1.6027.3.5.1.1.1.1.5
1 = Dell EMC Networking OS
file
2 = running-config
3 = startup-config
Specifies the type of file to
copy to.
● If copySourceFileType
is running-config or
startup-config, the default
copyDestFileLocation is
flash.
● If copyDestFileType is a
binary, you must specify
copyDestFileLocation and
copyDestFileName.
copyDestFileLocation .1.3.6.1.4.1.6027.3.5.1.1.1.1.6
1 = flash
2 = slot0
3 = tftp
4 = ftp
5 = scp
Specifies the location of
destination file.
● If copyDestFileLocation
is FTP or SCP,
you must specify
copyServerAddress,
copyUserName, and
copyUserPassword.
copyDestFileName .1.3.6.1.4.1.6027.3.5.1.1.1.1.7 Path (if the file is not in
the default directory) and
filename.
Specifies the name of
destination file.
copyServerAddress .1.3.6.1.4.1.6027.3.5.1.1.1.1.8 IP Address of the server. The IP address of the server.
● If you specify
copyServerAddress, you
must also specify
copyUserName and
copyUserPassword.
copyUserName .1.3.6.1.4.1.6027.3.5.1.1.1.1.9 Username for the server. Username for the FTP, TFTP,
or SCP server.
882 Simple Network Management Protocol (SNMP)