Install Guide

Command Fields
Field Description
size(b) Lists the size (in bytes) of the storage location. If the location is remote, no size is
listed.
Free(b) Lists the available size (in bytes) of the storage location. If the location is remote,
no size is listed.
Feature Displays the formatted DOS version of the device.
Type Displays the type of storage. If the location is remote, the word network is listed.
Flags Displays the access available to the storage location. The following letters indicate
the level of access:
● r = read access
● w = write access
Prefixes Displays the name of the storage location.
Related
Commands
● format flash – erases all the existing files and reformats the file system in the internal flash memory.
show os-version
Display the release and software image version information of the image file specified.
Syntax
show os-version [file-url]
Parameters
file-url (OPTIONAL) Enter the following location keywords and information:
● For a file on the internal flash, enter flash:// followed by the filename.
● For a file on an FTP server, enter ftp://user:password@hostip/
filepath.
● For a file on a TFTP server, enter tftp://hostip/filepath.
● For a file on the USB port, enter usbflash://filepath.
Defaults none
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
68 File Management