Install Guide

show hardware stack-unit
Display the data plane or management plane input and output statistics of the designated component of the designated stack
member.
Syntax
show hardware stack-unit stack-unit-number {cpu {data-plane statistics |
i2c statistics | management statistics | party-bus statistics | sata-
interface statistics} | drops [unit unit-number] | fpga registers | stack-
port stack-port-number | unit unit-number {counters | details | ipmc-
replication | port-stats [detail] | register | table-dump table-name}}
Parameters
stack-unit stack-
unit-number
{command-
option}
Enter the keywords stack-unit to select a particular stack member and then
enter one of the following command options to display a collection of data based on
the option entered. The range is from 1 to 6.
cpu data-plane
statistics
Enter the keywords cpu data-plane statistics then the keywords stack
port and its number, to display the data plane statistics, which shows the High
Gig (Higig) port raw input/output counter statistics to which the stacking module
is connected. Enter the keywords cpu data-plane statistics to display the
data plane statistics.
cpu i2c statistics Enter the keywords cpu i2c statistics to display the counters of i2c
devices.
cpu management
statistics
Enter the keywords cpu management statistics to display the counters of
the management port.
cpu party-bus
statistics
Enter the keywords cpu party-bus statistics, to display the Management
plane input/output counter statistics of the pseudo party bus interface.
cpu sata-
interface
statistics
Enter the keywords cpu sata-interface statistics to display the sata
interface error counter statistics.
drops [unit unit-
number ]
Enter the keyword drops to display internal drops on the selected stack member.
Enter the optional keyword unit unit-number to display the internal drop
counters of the specified port pipe.
fpga register Enter the keyword to display the register value of the fpga register.
unit unit-number
{counters |
details | port-
stats [detail]
| register}unit
unit-number
{counters | ipmc-
replication |
details | port-
stats [detail]
| register
| table-dump
table-name}
Enter the keyword unit then a number and then enter one of the keywords to
troubleshoot errors on the selected port-pipe and to give status on why a port is
not coming up to register level.
TI monitor Enter the unit keyword to show information regarding the TI register.
Defaults None
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.12(1.0) Introduced on the S5048F–ON.
512 Debugging and Diagnostics